Equipment List
Going Green
Employees
Forms
Contact Us
Press
 
      TELESCOPIC BOOMLIFT

Caterpillar 5K Industrial

S P E C I F I C A T I O N S
CHARACTERISTICS
Capacity at Rated Load Center 3000 lbs (1500 kg)
Capacity at Load Center-Distance 24 in (500 mm)
Power LP Gas
Tire Type Cushion
Wheels (x = driven) Number, Front / Rear 2x / 2
DIMENSIONS
Lift - Maximum Fork Height with Rated Load 162 in (4120 mm)
Lift with Standard Two-Stage Mast - Maximum Fork Height (Top of Forks) 131 in (3345 mm)
Lift with Standard Two-Stage Mast - Free Fork Height 4.5 in (115 mm)
Forks - Thickness x Length x Width 1.4 in x 42 in x 4 in (35 mm x 1070 mm x 100 mm)
Fork Spacing - Out-To-Out Minimum / Maximum 7.85 in / 32.25 in (200 mm / 820 mm)
Tilt - Forward / Backward

5 degrees / 10 degrees

Length to Fork Face

82.0 in (2085 mm)

Width - with Standard Tires 38.2 in (970 mm)
Width - with Standard Tires, Wide-Stance 39.2 in (995 mm)
Width - with Standard Tires, Wide-Axle N/A (N/A)
Height - Mast Lowered 82.9 in (2105 mm)
Height - Seat Height 43.3 in (1100 mm)
Height - To Top of Overhead Guard 81.1 in (2060 mm)
Height - Mast Extended 179.2 in (4550 mm)
Minimum Outside Turning Radius 70.0 in (1777 mm)
Load Moment Constant 15.3 in (390 mm)
Minimum Aisle - 90 Degree Stack - Zero Clearance without Load 85.2 in (2165 mm)
PERFORMANCE
Speeds - Travel Speed Loaded / Empty 9.8 mph / 10.2 mph (15.8 km/h / 16.4 km/h)
Speeds - Lift Speed Loaded / Empty 121 fpm / 125 fpm (617 mm/s / 633 mm/s)
Speeds - Lowering Speed Loaded / Empty 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar Pull - Loaded at 1 mph (1.6 km) 3760 lbs (16,715 N)
Drawbar Pull - Loaded Maximum 4245 lbs (18,880 N)
Gradeability - Loaded at 1 mph (1.6 km) 37%
Gradeability - Maximum Loaded / Empty 43% / 20%
WEIGHT
Empty 6067 lbs (2752 kg)
Axle Load - Without Load Front / Rear 2315 lbs / 3752 lbs (1050 kg / 1702 kg)
Axle Load - With Front Load 7831 lbs (3552 kg)
CHASSIS
Tire Size - Front, Standard 18 in x 6 in x 12 1/8 in
Tire Size - Rear 14 in x 5 in x 10 in
Wheelbase 46.9 in (1190 mm)
Tread Width - Front, Standard Tires 32.2 in (820 mm)
Tread Width - Front, Wide-Stance Tires 33.2 in (845 mm)
Tread Width - Rear, Standard Tires 31.8 in (810 mm)
Ground Clearance - At Lowest Point of Mast 2.9 in (75 mm)
Ground Clearance - At Center of Wheelbase 4.5 in (118 mm)
Brakes - Service Foot - Hydraulic
Brakes - Parking Hand - Mechanical
POWER TRAIN
Engine - Model K21
Engine - Continuous Output (S.A.E. Gross) 52 HP (38.7 kW)
Engine - Continuous Output (S.A.E. Gross) at rpm 2400
Engine - Maximum Torque (S.A.E. Gross) 119 lb-ft (161 Nm/rpm)
Engine - Maximum Torque (S.A.E. Gross) at rpm 2000
Engine - Cylinder Displacement 126 cu in (2065 L)
Transmission - Type Powershift
Transmission - Number of Speeds Forward / Reverse 1 / 1
Battery 12 volts
HYDRAULICS
Relief Pressure - For Attachments at Auxiliary Value 2250 psi (158 kg/cm2)
Hydraulic Flow - For Attachments at Auxiliary Value 19 gpm (72 lpm)

Caterpillar 5K Industrial Dimensions Images and text provided by
Caterpillar


Back To Equipment
Phone: 818-840-8247 | Fax: 818-847-0941 | Email: info@247studioequipment.com

HOME | PRIVACY POLICY | TERMS OF USE | LINKS
© 2006-2007 24/7 Studio Equipment, Inc. All Rights Reserved.

Website designed by HM Concepts