Equipment List
Going Green
Employees
Forms
Contact Us
Press
 
      TELESCOPIC BOOMLIFT

Caterpillar 5K Industrial

S P E C I F I C A T I O N S
CHARACTERISTICS
Capacity at Rated Load Center 5000 lbs (2500 kg)
Capacity at Load Center-Distance 24 in (500 mm)
Power Gas / LP Gas
Tire Type Cushion
Wheels (x = driven) Number, Front / Rear 2x / 2
DIMENSIONS
Lift - Maximum Fork Height with Rated Load 170 in (4320 mm)
Lift with Standard Two-Stage Mast - Maximum Fork Height (Top of Forks) 131 in (3345 mm)
Lift with Standard Two-Stage Mast - Free Fork Height 5.3 in (135 mm)
Forks - Thickness x Length x Width 1.6 in x 42 in x 3.9 in (45 mm x 1070 mm x 100 mm)
Fork Spacing - Out-To-Out Minimum / Maximum 7.8 in / 36 in (200 mm / 920 mm)
Tilt - Forward / Backward 5 degrees / 9 degrees
Length to Fork Face

93.0 in (2360 mm)

Width - with Standard Tires 42.0 in (1065 mm)
Width - with Standard Tires, Wide-Stance 44.5 in (1130 mm)
Width - with Standard Tires, Wide-Axle N/A (N/A)
Height - Mast Lowered 83.5 in (2110 mm)
Height - Seat Height 43.0 in (1090 mm)
Height - To Top of Overhead Guard 82.0 in (2075 mm)
Height - Mast Extended 180 in (4570 mm)
Minimum Outside Turning Radius 79.5 in (2020 mm)
Load Moment Constant 16.5 in (420 mm)
Minimum Aisle - 90 Degree Stack - Zero Clearance without Load 96.0 in (2440 mm)
PERFORMANCE
Speeds - Travel Speed Loaded / Empty 11.0 mph / 11.5 mph (17.5 km/h / 18.0 km/h)
Speeds - Lift Speed Loaded / Empty 125 fpm / 130 fpm (640 mm/s / 650 mm/s)
Speeds - Lowering Speed Loaded / Empty 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar Pull - Loaded at 1 mph (1.6 km) 4325 lbs (19,200 N)
Drawbar Pull - Loaded Maximum 4850 lbs (21,600 N)
Gradeability - Loaded at 1 mph (1.6 km) 34.8 %
Gradeability - Maximum Loaded / Empty 39.6% / 22.8%
WEIGHT
Empty 8157 lbs (3700 kg)
Axle Load - Without Load Front / Rear 2833 lbs / 5324 lbs (1285 kg / 2415 kg)
Axle Load - With Front Load 11,488 lbs (5211 kg)
CHASSIS
Tire Size - Front, Standard 21 in x 7 in x 15 in
Tire Size - Rear 16 in x 6 in x 10.5 in
Wheelbase 55.0 in (1400 mm)
Tread Width - Front, Standard Tires 35.0 in (886.4 mm)
Tread Width - Front, Wide-Stance Tires 37.5 in (950 mm)
Tread Width - Rear, Standard Tires 35 in (890 mm)
Ground Clearance - At Lowest Point of Mast 3.1 in (80 mm)
Ground Clearance - At Center of Wheelbase 5.4 in (139 mm)
Brakes - Service Foot - Hydraulic
Brakes - Parking Hand - Mechanical
POWER TRAIN
Engine - Model K25
Engine - Continuous Output (S.A.E. Gross) 60 HP (45 kW)
Engine - Continuous Output (S.A.E. Gross) at rpm 2700
Engine - Maximum Torque (S.A.E. Gross) 136 lb-ft (185 Nm/rpm)
Engine - Maximum Torque (S.A.E. Gross) at rpm 1600
Engine - Cylinder Displacement 152 cu in (2.5 L)
Transmission - Type Powershift
Transmission - Number of Speeds Forward / Reverse 1 / 1
Battery 12 volts
HYDRAULICS
Relief Pressure - For Attachments at Auxiliary Value 2250 psi (158 kg/cm2)
Hydraulic Flow - For Attachments at Auxiliary Value 23.5 gpm (89.1 lpm)

Caterpillar 5K Industrial Dimensions Images and text provided by
Caterpillar


Back To Equipment
Phone: 818-840-8247 | Fax: 818-847-0941 | Email: info@247studioequipment.com

HOME | PRIVACY POLICY | TERMS OF USE | LINKS
© 2006-2007 24/7 Studio Equipment, Inc. All Rights Reserved.

Website designed by HM Concepts